The Effect of Composition on the Properties and Application of CuO-NiO Nanocomposites Synthesized Using a Saponin-Green/Microwave-Assisted Hydrothermal Method.

In this study, we explored the formation of CuO nanoparticles, NiO nanoflakes, and CuO-NiO nanocomposites using saponin extract and a microwave-assisted hydrothermal method. Five green synthetic samples were prepared using aqueous saponin extract and a microwave-assisted hydrothermal procedure at 200 °C for 30 min. The samples were pristine copper oxide (100C), 75% copper oxide-25% nickel oxide (75C25N), 50% copper oxide-50% nickel oxide (50C50N), 25% copper oxide-75% nickel oxide (25C75N), and pristine nickel oxide (100N). The samples were characterized using FT-IR, XRD, XPS, SEM, and TEM. The XRD results showed that copper oxide and nickel oxide formed monoclinic and cubic phases, respectively. The morphology of the samples was useful and consisted of copper oxide nanoparticles and nickel oxide nanoflakes. XPS confirmed the +2 oxidation state of both the copper and nickel ions. Moreover, the optical bandgaps of copper oxide and nickel oxide were determined to be in the range of 1.29-1.6 eV and 3.36-3.63 eV, respectively, and the magnetic property studies showed that the synthesized samples exhibited ferromagnetic and superparamagnetic properties. In addition, the catalytic activity was tested against para-nitrophenol, demonstrating that the catalyst efficiency gradually improved in the presence of CuO. The highest rate constants were obtained for the 100C and 75C25N samples, with catalytic efficiencies of 98.7% and 78.2%, respectively, after 45 min.

Thermo-immune synergy: Camrelizumab plus microwave ablation in preoperative early-stage breast cancer.

Immunotherapy has enhanced breast cancer outcomes, but optimizing combination therapies is crucial. Integrating additional treatment modalities, like physical therapies, holds promise for optimizing efficacy. Pan et al. recently reported that combining preoperative immunotherapy with microwave ablation is safe and feasible in early-stage breast cancer, effectively sensitizing peripheral CD8+ T cells.1.

Transapical intramyocardial septal microwave ablation in treatment of hypertrophic obstructive cardiomyopathy: 12-month outcomes of a swine model.

BACKGROUND: To date, the extended Morrow procedure is considered the gold standard treatment for patients with obstructive hypertrophic cardiomyopathy who experience severe symptoms and are unresponsive to medication treatment. We therefore aimed to perform transapical intramyocardial septal microwave ablation to reduce the thickness of the interventricular septum myocardium in a minimally invasive method. METHODS: Fourteen swine were divided to form either a microwave ablation group (n = 7) or a sham group (n = 7). In the microwave ablation group, a transapical microwave antenna was inserted into the septum to ablate each myocardial segment at 40 W for 1 min, while in the sham group, the same operation was performed but without power output. We used echocardiography, electrocardiogram, during the operation. And added computerized tomography, cardiac nuclear magnetic resonance during follow-up. RESULTS: Segment hypokinesis was observed in all swine immediately following ablation. Compared with the sham group, the thickness of ablated segments in the ablation group decreased significantly 1 month post-operation (ablation group, 5.53 ± 1.00 mm vs. 8.03 ± 1.15 mm, respectively, P < 0.01; sham group, 8.40 ± 0.94 mm vs. 8.21 ± 1.09 mm, respectively, P = 0.081), and the outcome was still observed 1 year post-operation (ablation group, 3.36 ± 0.85 mm vs. 8.03 ± 1.15 mm, respectively, P < 0.01). No perforation of the septum was observed during the procedure or follow-up, and no heart failure or sudden cardiac death occurred during postoperative feeding. CONCLUSIONS: Transapical intramyocardial septal microwave ablation can effectively and safely produce a large region of necrosis. This technique can potentially mimic surgical myectomy while avoiding cardiopulmonary bypass and median sternotomy in high-risk hypertrophic obstructive cardiomyopathy patients.

[Application of microwave vacuum drying with process management in extract drying of personalized traditional Chinese medicine preparations].

Extracts are important intermediates in the production of traditional Chinese medicines preparations. The drying effect of extracts will directly affect the subsequent production process and the quality of the preparation. To meet the requirements of high drug loading, short time consumption, and simple production process of personalized traditional Chinese medicine preparations, this study explored the application of multi-program microwave vacuum drying process in the extract drying of personalized traditional Chinese medicine preparations. The influencing factors of microwave vacuum drying process were investigated for 5 excipients and 40 prescriptions. Taking the feasibility of drying, drying rate, drying time, and dried extract status as indicators, this study investigated the feeding requirements of microwave vacuum drying. With the dried extract status as the evaluation indicator, the three drying programs(A, B, and C) were compared to obtain the optimal drying condition. The experimental results showed that the optimal feeding conditions for microwave vacuum drying were material layer thickness of 2 cm and C program(a total of 7 drying processes), which solved the problem of easy scorching in microwave drying with process management. Furthermore, the preset moisture content of the dried extract in microwave drying should be 4%-5%, so that the dried extract of traditional Chinese medicine preparation had uniform quality, complete drying, and no scorching. This study lays a foundation for the application of microwave drying in the production of traditional Chinese medicine preparations, promoting the high-quality development of personalized traditional Chinese medicine preparations.

A broadband multi-frequency microwave combined biological exposure setup.

With the rapid popularization of wireless electronic devices, there has been an increasing concern about the impacts of the electromagnetic environment on health. However, most research reports on the biological effects of microwaves have focused on a single frequency point. In reality, people are exposed to complex electromagnetic environments that consist of multiple frequency microwave signals in their daily lives. It is important to investigate whether multi-frequency combined microwave energies have different biological effects compared with single frequency microwave energy. Unfortunately, there are limited reports on this topic due to the lack of suitable platforms for research on multi-frequency microwave energy combined with biological exposure. To address this issue, this study presents a setup that has a very wide working frequency bandwidth and can be compatible with single frequency and multi-frequency microwave combined exposure. Moreover, it can achieve relatively equal exposure to multiple biological samples at any frequency point in the working frequency range, which is crucial for electromagnetic biology research. The experimental results are in good agreement with the simulation results, confirming its capability to facilitate the study of complex electromagnetic environment effects on organisms.

Microwave Ablation versus Surgical Resection for US-detected Multifocal T1N0M0 Papillary Thyroid Carcinoma: A 10-Center Study.

Background Microwave ablation (MWA) is currently under preliminary investigation for the treatment of multifocal papillary thyroid carcinoma (PTC) and has shown promising treatment efficacy. Compared with surgical resection (SR), MWA is minimally invasive and could preserve thyroid function. However, a comparative analysis between MWA and SR is warranted to draw definitive conclusions. Purpose To compare MWA and SR for preoperative US-detected T1N0M0 multifocal PTC in terms of overall and 1-, 3-, and 5-year progression-free survival rates and complication rates. Materials and Methods In this retrospective study, 775 patients with preoperative US-detected T1N0M0 multifocal PTC treated with MWA or SR across 10 centers between May 2015 and December 2021 were included. Propensity score matching (PSM) was performed for patients in the MWA and SR groups, followed by comparisons between the two groups. The primary outcomes were overall and 1-, 3-, and 5-year progression-free survival (PFS) rates and complication rates. Results After PSM, 229 patients (median age, 44 years [IQR 36.5-50.5 years]; 179 female) in the MWA group and 453 patients (median age, 45 years [IQR 37-53 years]; 367 female) in the SR group were observed for a median of 20 months (range, 12-74 months) and 26 months (range, 12-64 months), respectively. MWA resulted in less blood loss, shorter incision length, and shorter procedure and hospitalization durations (all P < .001). There was no evidence of differences in overall and 1-, 3-, or 5-year PFS rates (all P > .05) between MWA and SR (5-year rate, 77.2% vs 83.1%; P = .36) groups. Permanent hoarseness (2.2%, P = .05) and hypoparathyroidism (4.0%, P = .005) were encountered only in the SR group. Conclusion There was no evidence of a significant difference in PFS rates between MWA and SR for US-detected multifocal T1N0M0 PTC, and MWA resulted in fewer complications. Therefore, MWA is a feasible option for selected patients with multifocal T1N0M0 PTC. © RSNA, 2024 Supplemental material is available for this article. See also the editorial by Georgiades in this issue.

Clinical safety and efficacy of microwave ablation for small renal masses.

PURPOSE: CT-guided MWA is a safe and effective tool that should be utilized in the treatment of small renal masses (SRMs). We aim to clarify the utility of CT-guided MWA by examining patient outcomes such as recurrence, treatment success, changes in renal function, and complications. METHODS: A retrospective review of consecutive patients with SRMs who underwent same day renal mass biopsy (RMB) and CT-guided MWA between 2015 and 2022 was performed. Treatment safety was assessed by 30-day complications according to the Clavien-Dindo system and change in eGFR >30 days post-procedure. Treatment efficacy was defined by local recurrence and incomplete treatment rates and calculated using the Kaplan-Meier method. RESULTS: A total of 108 renal masses were found in 104 patients. The overall complication rate was 7.4% (8/108), of which 4 were major complications (3.7%). For those with renal function available >30 days post ablation, the median eGFR was 47.2 (IQR: 36.0, 57), compared to 52.3 (IQR: 43.7, 61.5) pre-ablation, p<0.0001. 5-year local recurrence free survival was 86%. Among those with biopsy proven malignancy (n= 66), there were five local recurrences (7.54%) occurring at a median of 25.1 months (IQR 19.9, 36.2) and one case (1.5%) of incomplete treatment. CONCLUSIONS: As the medical field continues to evolve towards less invasive interventions, MWA offers a valuable tool in the management of renal masses. With low major complication and recurrence rates, our findings support the utility of CT-guided MWA as a tool for treatment of SRMs.

Ultrasound-guided microwave ablation for the treatment of idiopathic granulomatous mastitis: comparison with surgical excision.

BACKGROUND: Idiopathic granulomatous mastitis (IGM) results in notable clinical symptoms and breast deformity. This study aimed to evaluate the clinical feasibility of microwave ablation (MWA) for the treatment of IGM through comparison with surgical excision. METHODS: From June 2016 to December 2020, a total of 234 consecutive patients admitted to the hospital were retrospectively included in this study. IGM was pathologically confirmed via breast biopsy in all included patients. These patients were divided into the MWA group (n = 91) and surgical group (n = 143) based on the type of treatment. Patients in both groups received oral prednisone prior to intervention. The clinical remission rate, recurrence rate, operative pain, complications, and BREAST Q score were compared between the two groups. RESULTS: There were 340 lesions in the MWA group, and 201 lesions in the surgical group were ultimately included. Significant differences in the complete remission rate (96.7% vs. 86.7%, p = 0.020), recurrence rate (3.3% vs. 13.3%, p = 0.020), operation time (48.7±14.6 min vs. 68.1±36.4 min, p < 0.001), postoperative pain (p < 0.001) and postoperative BREAST Q score (p < 0.001) were observed between the MWA and surgical groups. CONCLUSIONS: Microwave ablation is feasible for the treatment of IGM, due to its high curative rate and low recurrence rate. Because of the minimal invasiveness of MWA and sufficient preservation of the gland and contour of the breast, patients are more satisfied with the appearance of the breast. Therefore, for patients with complex conditions requiring surgery, MWA is a good alternative treatment.

Stereotactic ablative brachytherapy versus percutaneous microwave ablation as salvage treatments for lung oligometastasis from colorectal cancer.

BACKGROUND: The treatment for lung oligometastasis from colorectal cancer (CRC) remains challenging. This retrospective study aimed to compare the local tumor control, survival and procedure-related complications in CRC patients undergoing low-dose rate stereotactic ablative brachytherapy (L-SABT) versus percutaneous microwave ablation (MWA) for lung oligometastasis. METHODS: Patients between November 2017 and December 2020 were retrospectively analyzed. Local tumor progression-free survival (LTPFS) and overall survival (OS) were analyzed in the entire cohort as well as by stratified analysis based on the minimal ablation margin (MAM) around the tumor. RESULTS: The final analysis included 122 patients: 74 and 48 in the brachytherapy and MWA groups, respectively, with a median follow-up of 30.5 and 35.3 months. The 1- and 3-year LTPFS rate was 54.1% and 40.5% in the brachytherapy group versus 58.3% and 41.7% in the MWA group (P = 0.524 and 0.889, respectively). The 1- and 3-year OS rate was 75.7% and 48.6% versus 75.0% and 50.0% (P = 0.775 and 0.918, respectively). Neither LTPFS nor OS differed significantly between the patients with MAM of 5-10 mm versus > 10 mm. Pulmonary complication rate did not differ in the overall analysis, but was significantly higher in the MWA group in the subgroup analysis that only included patients with lesion within 10 mm from the key structures (P = 0.005). The increased complications was primarily bronchopleural fistula. CONCLUSIONS: Considering the caveats associated with radioisotope use in L-SABT, MWA is generally preferable. In patients with lesion within 10 mm from the key pulmonary structures, however, L-SABT could be considered as an alternative due to lower risk of bronchopleural fistula.

[Spatial distribution pattern of local tumor progression analysis after microwave ablation of hepatocellular carcinoma based on three-dimensional magnetic resonance imaging].

Objective: To investigate the spatial distribution pattern of local tumor progression (LTP) for hepatocellular carcinoma (HCC) ≤5 cm after microwave ablation. Methods: A retrospective analysis was performed on 169 HCCs with matched MRI before and after ablation from December 2009 to December 2019. A tumor MRI was reconstructed using three-dimensional visualization technology. LTP was classified as contact or non-contact, early or late stage, according to whether LTP was in contact with the edge of the ablation zone and the occurrence time (24 months). The tumor-surrounded area was divided into eight quadrants by using the eight-quadrant map method. An analysis was conducted on the spatial correlation between the quadrant where the ablative margin (AM) safety boundary was located and the quadrant where different types of LTP occurred. The t-test, or rank-sum test, was used for the measurement data. 2-test for count data was used to compare the difference between the two groups. Results: The AM quadrant had a distribution of 54.4% LTP, 64.2% early LTP stage, and 69.1% contact LTP, suggesting this quadrant was much more concentrated than the other quadrants (P < 0.001). Additionally, the AM quadrant had only 15.2% of non-contact type LTP and 17.1% of late LTP, which was not significantly different from the average distribution probability of 12.5% (100/8%) among the eight quadrants (P = 0.667, 0.743). 46.6% of early contact type LTP was located at the ablation needle tip, 25.2% at the body, and 28.1% at the caudal, while the location distribution probabilities of non-early contact LTP were 34.8%, 31.8%, and 33.3%, respectively. Conclusion: LTP mostly occurs in areas where the ablation safety boundary is the shortest. However, non-contact LTP and late LTP stages exhibit the feature of uniform distribution. Thus, this type of LPT may result from an inadequate non-ablation safety boundary.

Recovery of Cembratrien-Diols from Waste Tobacco (Nicotiana tabacum L.) Flowers by Microwave-Assisted Deep Eutectic Solvent Extraction: Optimization, Separation, and In Vitro Bioactivity.

Deep eutectic solvents (DESs) are novel solvents with physicochemical properties similar to those of ionic liquids, and they have attracted extensive attention for the extraction of bioactive compounds from different plant materials in the context of green chemistry and sustainable development. In this study, seven DESs with different polarities were explored as green extraction solvents for cembratrien-diols (CBT-diols) from waste tobacco flowers. The best solvent, DES-3 (choline chloride: lactic acid (1:3)), which outperformed conventional solvents (methanol, ethanol, and ethyl acetate), was selected and further optimized for microwave-assisted DES extraction using the response surface methodology. The maximum yield of CBT-diols (6.23 ± 0.15 mg/g) was achieved using a microwave power of 425 W, microwave time of 32 min, solid/liquid ratio of 20 mg/mL, and microwave temperature of 40 °C. Additionally, the isolated CBT-diols exhibited strong antimicrobial activity against Salmonella, Staphylococcus aureus, Escherichia coli, Bacillus subtilis, and Pseudomonas aeruginosa and antitumor activity in the human liver cancer HepG2 and SMMC-7721 cell lines. This study highlights the feasibility of recovering CBT-diols from tobacco flower waste using DESs and provides opportunities for potential waste management using green technologies.

Microwave hyperthermia enhances radiosensitization by decreasing DNA repair efficiency and inducing oxidative stress in PC3 prostatic adenocarcinoma cells.

PURPOSE: Radiotherapy (RT) is the primary treatment for prostate cancer (PCa); however, the emergence of castration-resistant prostate cancer (CRPC) often leads to treatment failure and cancer-related deaths. In this study, we aimed to explore the use of microwave hyperthermia (MW-HT) to sensitize PCa to RT and investigate the underlying molecular mechanisms. METHODS: We developed a dedicated MW-HT heating setup, created an in vitro and in vivo MW-HT + RT treatment model for CRPC. We evaluated PC3 cell proliferation using CCK-8, colony experiments, DAPI staining, comet assay and ROS detection method. We also monitored nude mouse models of PCa during treatment, measured tumor weight, and calculated the tumor inhibition rate. Western blotting was used to detect DNA damage repair protein expression in PC3 cells and transplanted tumors. RESULTS: Compared to control, PC3 cell survival and clone formation rates decreased in RT + MW-HT group, demonstrating significant increase in apoptosis, ROS levels, and DNA damage. Lower tumor volumes and weights were observed in treatment groups. Ki-67 expression level was reduced in all treatment groups, with significant decrease in RT + MW-HT groups. The most significant apoptosis induction was confirmed in RT + MW-HT group by TUNEL staining. Protein expression levels of DNA-PKcs, ATM, ATR, and P53/P21 signaling pathways significantly decreased in RT + MW-HT groups. CONCLUSION: MW-HT + RT treatment significantly inhibited DNA damage repair by downregulating DNA-PKcs, ATM, ATR, and P53/P21 signaling pathways, leading to increased ROS levels, aggravate DNA damage, apoptosis, and necrosis in PC3 cells, a well-established model of CRPC.

Microwave ablation for diffuse adenomyosis leading to multiple complications after hysterectomy: A case report and literature review.

RATIONALE: Hysterectomy after microwave ablation (MWA) is more difficult than conventional surgery which increases the probability of postoperative complications due to MWA's collateral thermal damage to nearby intestines. Here we report a case of multiple postoperative complications after hysterectomy following MWA. PATIENT CONCERNS: A 44-year-old female was admitted due to progressive abdominal pain during menstruation for 30 years and no relief 1 year after MWA. Hysterectomy was performed. Intraoperative findings: pelvic inflammatory exudation; the uterus and the left adnexa were extensively and densely adhered to the intestine, bladder, pelvic wall and surrounding tissues; the local tissue of the uterus was brittle and dark yellow. Intestinal obstruction, abdominal infection and urinary fistula occurred after hysterectomy. DIAGNOSES: 1. Adenomyosis. 2. Endometrial polyps. 3. Left chocolate cyst of ovary. 4. Pelvic adhesions. 5. Pelvic inflammation. INTERVENTIONS: The patient underwent intestinal obstruction catheter implantation, ultrasound-guided pelvic fluid mass puncture drainage, right kidney puncture and fistula drainage, right ureteral bladder replantation, and right ureteral stent implantation. OUTCOMES: After 48 days of comprehensive treatment, the patient was cured and discharged. LESSONS: Microwave ablation has a poor therapeutic effect on diffuse adenomyosis, and should avoid excessive ablation during the ablation process.

Spatiotemporal modeling of nano-delivered chemotherapeutics for synergistic microwave ablation cancer therapy.

BACKGROUND AND OBJECTIVE: The effectiveness of current microwave ablation (MWA) therapies is limited. Administration of thermosensitive liposomes (TSLs) which release drugs in response to heat has presented a significant potential for enhancing the efficacy of thermal ablation treatment, and the benefits of targeted drug delivery. However, a complete knowledge of the mechanobiological processes underlying the drug release process, especially the intravascular drug release mechanism and its distribution in response to MWA needs to be improved. Multiscale computational-based modeling frameworks, integrating different biophysical phenomena, have recently emerged as promising tools to decipher the mechanobiological events in combo therapies. The present study aims to develop a novel multiscale computational model of TSLs delivery following MWA implantation. METHODS: Due to the complex interplay between the heating procedure and the drug concentration maps, a computational model is developed to determine the intravascular release of doxorubicin from TSL, its transvascular transport into the interstitium, transport in the interstitium, and cell uptake. Computational models can estimate the interplays among liposome and drug properties, tumor perfusion, and heating regimen to examine the impact of essential parameters and to optimize a targeted drug delivery platform. RESULTS: Results indicated that the synergy of TSLs with MWA allows more localized drug delivery with lower side effects. The drug release rate and tumor permeability play crucial roles in the efficacy of TSLs during MWA treatment. The computational model predicted an unencapsulated drug lime around the ablated zone, which can destroy more cancer cells compared to MWA alone by 40%. Administration of TSLs with a high release rate capacity can improve the percentage of killed cancer cells by 24%. Since the heating duration in MWA is less than 15 min, the presented combination therapy showed better performance for highly permeable tumors. CONCLUSION: This study highlights the potential of the proposed computational framework to address complex and realistic scenarios in cancer treatment, which can serve as the future research foundation, including advancements in nanomedicine and optimizing the pair of TSL and MWA for both preclinical and clinical studies. The present model could be as a valuable tool for patient-specific calibration of essential parameters.

Facile One-Pot Synthesis and Anti-Microbial Activity of Novel 1,4-Dihydropyridine Derivatives in Aqueous Micellar Solution under Microwave Irradiation.

The current study describes a novel and eco-conscious method to synthesize 1,4-dihydropyridine derivatives utilizing an aqueous micellar solution containing aluminum dodecyl sulfate, Al(DS)3, using readily available starting material. The final products were synthesized with excellent yields within remarkably quick reaction durations, promoting remarkable atom economy and minimizing environmental impacts. The present protocol has several advantages over other methodologies in terms of high yield (up to 97%) with excellent purity. Further, the synthesized 1,4-DHPs exhibit favorable to excellent resistance against examined bacterial and fungal species. Intriguingly, polar groups on the phenyl ring (5b, 5c, 5i and 5j) make the 1,4-DHPs equally potent against the microbes as compared to the standard drugs.

Green Approach to Enhance the Recovery of Polyphenols from Blackcurrant and Bilberry Leaves: Evaluation of Microwave-Assisted and Pressurized Liquid Extraction.

The aim of the present study was to evaluate microwave-assisted (MAE) and pressurized liquid extraction (PLE) for the recovery of polyphenols from blackcurrant and bilberry leaves and the preservation of their antioxidant activity. The extractions were carried out varying the solvent/solid (SS) ratio, temperature and time. During MAE, increasing the SS ratio increased the polyphenol concentration in the extracts from blackcurrant and bilberry leaves, while increasing the temperature had a positive effect only on bilberry polyphenols. During PLE, only a temperature increase was a determining factor for the isolation of blackcurrant leave polyphenols. Based on polyphenol recovery, optimal extraction parameters were established resulting in a yield of 62.10 and 56.06 mg/g dw in the blackcurrant and bilberry MAE extracts and 78.90 and 70.55 mg/g dw in the PLE extracts. The optimized extracts were profiled by UPLC ESI MS2, and their antioxidant capacity was evaluated through FRAP, DPPH, ABTS and ORAC assays. The characterization of the extracts by UPLC ESI MS2 confirmed flavonols as the predominant compounds in both blackcurrant and bilberry leaves, while flavan-3-ols and procyanidins were the main compounds responsible for high antioxidant capacity as confirmed by the ABTS and ORAC assays. Due to the extract composition and antioxidant capacity, PLE proved to be a technique of choice for the production of blackcurrant and bilberry leave extracts with high potential for use as value-added ingredients in the food and nutraceutical industry.

Realistic 3D Phantoms for Validation of Microwave Sensing in Health Monitoring Applications.

The development of new medical-monitoring applications requires precise modeling of effects on the human body as well as the simulation and the emulation of realistic scenarios and conditions. The first aim of this paper is to develop realistic and adjustable 3D human-body emulation platforms that could be used for evaluating emerging microwave-based medical monitoring/sensing applications such as the detection of brain tumors, strokes, and breast cancers, as well as for capsule endoscopy studies. New phantom recipes are developed for microwave ranges for phantom molds with realistic shapes. The second aim is to validate the feasibility and reliability of using the phantoms for practical scenarios with electromagnetic simulations using tissue-layer models and biomedical antennas. The third aim is to investigate the impact of the water temperature in the phantom-cooking phase on the dielectric properties of the stabilized phantom. The evaluations show that the dielectric properties of the developed phantoms correspond closely to those of real human tissue. The error in dielectric properties varies between 0.5-8%. In the practical-scenario simulations, the differences obtained with phantoms-based simulations in S21 parameters are 0.1-13 dB. However, the differences are smaller in the frequency ranges used for medical applications.

Waste paper-derived porous carbon via microwave-assisted activation for energy storage and water purification.

The reuse of waste papers by conversion into valuable carbon materials has received considerable attention for diverse applications such as energy storage and water purification. However, traditional methods for converting waste papers into materials with suitable properties for specific applications are often complex and ineffective, involving consecutive carbonization and activation steps. Herein, we propose a simple one-step microwave (MW)-assisted synthesis for preparing waste paper-derived porous carbons (WPCs) for energy storage and water purification. Through a 30-min synthesis, WPCs with graphitic structure and high specific surface area were successfully produced. The fabricated WPCs exhibited outstanding charge storage capability with a maximum specific capacitance of 237.7 F g-1. Additionally, the WPC demonstrates a high removal efficiency for various dyes, achieving a maximum removal efficiency of 95.0% for methylene blue. The developed one-step MW synthesis not only enables the production of porous carbon from waste paper, but also offers a viable approach to address solid waste management challenges while simultaneously yielding valuable materials.

Microwave promoted graft copolymerization of poly(ethylacrylate) onto k-carrageenan for removal of Cd and Ni from aqueous solution.

Microwave promoted graft copolymerization of poly (ethyl acrylate) onto kappa-carrageenan in presence of a redox pair (ascorbic acid and potassium persulfate) led to the formation of a novel copolymer hydrogel, kappa-carrageenan-graft-poly (ethylacrylate). By varying the reaction conditions such as the microwave power, reaction time, concentration of kappa-carrageenan, ascorbic acid and persulfate, copolymers of highest percentage grafting was obtained and characterized by FT-IR, SEM, TGA and XRD. The copolymer was evaluated as an adsorbent for the adsorption of Ni(II) and Cd(II). Various adsorption parameters such as contact time, pH, initial metal ion concentration, temperature, electrolyte strength and adsorbent dosage were varied to obtain the optimum conditions for the adsorption. The adsorption data for Cd(II), fitted better for Langmuir and Ni(II), fitted much better for Freundlich adsorption isotherm model. Maximum adsorption obtained for cadmium ions and nickel ions was 308.6 mg/g-1 and 305.8 mg/g-1 respectively. The adsorption of both metal ions followed pseudo second order kinetic model. The positive ΔH values endorsed the adsorption process to be endothermic in nature. The negative values of ΔG indicate the spontaneity of the adsorption process while the positive ΔS values showed that the adsorption of metal ions proceeded with increased randomness at the surface of the copolymer. High recovery percentage of the metal ions from the adsorbent indicates that the copolymer can be used for more adsorption cycles.

Microwave-assisted catalytic pyrolysis of waste cooking oil to monocyclic aromatics under a bifunctional SiC ball catalyst.

Catalytic pyrolysis technology proves to be a highly effective approach for waste cooking oil management. However, high-pressure drops and easy deactivation of powder catalysts hinder the industrialization of this technology. In this study, a bifunctional SiC ball (ZSM-5/SiC ball structured) catalyst was prepared to produce monocyclic aromatics. Bifunctional SiC ball catalyst demonstrates notable microwave-responsive properties and remarkable catalytic efficacy. Results showed that the content of monocyclic aromatics under BFSB catalysis with microwave heating was the highest. Weight hourly space velocity is no longer one of the main factors affecting microwave-assisted catalytic pyrolysis under bifunctional SiC ball catalyst. Monocyclic aromatics content did not decrease significantly and was still higher than 86% when space velocity increased from 30 h-1 to 360 h-1. The highest space velocity could only be 180 h-1 under Powder ZSM-5, and the content of the monocyclic aromatics dropped rapidly to 67.68%. Furthermore, even after five operating cycles, the content of monocyclic aromatics with bifunctional SiC ball catalyst continues to surpass the initial content observed with Powder ZSM-5 at 500 °C and 180 h-1. Related characterizations revealed that coking is the primary cause of catalyst deactivation for both catalyst types; however, the bifunctional SiC ball catalyst exhibits a 29.1% lower occurrence of polyaromatic coke formation compared to Powder ZSM-5.